- With neutral or aggressive liquids
- Clear liquids free of particles, non-crystallizing.

The flow must be homogeneous and piping always full of liquid.
(FFG turbine type is not suitable for measuring gas flow)

The FFG flow sensor allows measurements of low flow-rates for remote reading or
totalization with appropriate monitors (See Codes and References on next page)

The dynamic pressure of the liquids makes rotate the turbine. The liquid passes through a calibrated nozzle, which increases its speed and that of the turbine.
Magnets are integrated to the turbine and activate an Hall effect sensor inside the top cover. The electronic generates a pulsating signal, proportional to the speed of rotation of the turbine and therefore to the flow-rate.

Recommendations for assembly:
The FFG works in any position, but it is recommended to mount it on a horizontal axis, with its upper body in a horizontal plane, to obtain reliable and precise measurements.
Respect the straight pipe section of 150 mm upstream and 50 mm downstream in order to obtain a uniform flow.
Installing an upstream filter prevents suspended particles from blocking the turbine (during commissioning, and, normal operation).

Associated electronics:
- BAMOWIZ : Flow rate indicator and flow totalizer, digital and graphical display, relays and analogue outputs (Data-sheet 217-01)
- BIF 6040: Flow indicator and totalizer with options for thresholds and analogue output (Data-sheet 282-01)
- BCP 48: Counter and downcounter for dosage with 2 set points (Data-sheet 289-03)
- BAMOTOP 281: Frequency converter for analogue output 0/4-20 mA or 0/5-10 V (Data-sheet 281-01)