BAMOPHAR 323 |
• Color touch screen
• Programmable ranges:
From 0-200 Ω .cm up to 0-200 MΩ .cm
From 0-2 μS/cm up to 0-20 mS/cm
• Associated measuring cells:
Cell factors: 10 - 1 - 0.1 - 0.01
• Temperature compensation
Automatic or manual compensation
• 2 outputs 0/4-20 mA, configurable
• 4 relays (Thresholds, alarm)
• Options:
RS422/ J-BUS + LOGGER
Extension terminal for 2nd measuring parameter
In combination with one of our conductivity cells (data-sheet 360-01), BAMOPHAR 323 is designed for conductivity or resistivity measurements.
Examples:
The device is equipped with a color touch screen for the display of a multilingual menu friendly and intuitive. It provides easy reading of measurement, temperature and state of the thresholds. It displays a menu with all parameters for configuration of analogue outputs, thresholds set up and regulation mode. In order to facilitate its commissioning, a programming menu can simulate the measurement, acting on the analog outputs, as well as on the thresholds.
Associated measuring cells have cell factors from 0.01 up to 10 for accurate measurements between 0 to 2 μS/cm and 20 mS/cm or O to 200 Ω.cm and 200 MΩ.cm .
BAMOPHAR 323 displays an absolute or compensated temperature measurement (Access to two reference charts: 20 °C and 25 °C).
An extension terminal (wall, panel or DIN rail mounting):
• Allows a second measuring parameter (pH, flow-rate, turbidity, etc.) - Data from this blind device displayed on the main unit
• Connected to main unit via a 4 wire shielded cable - Cable length between both devices: max. 500 m
• RS422 and Data Logger of main unit are shared between both units
